Wall mounted jib crane is also a light duty hoisting equipment for short range and intensive transportation in modern production. Similar with floor mounted jib crane, it also includes hoisting mechanism, slewing mechanism and electric parts. It is installed on the column fixed on the wall instead of floor, and that is where the biggest difference lies between it and floor mounted jib crane.

 

As it is mounted on the wall, more space is saved for easier operation and convenient transit. Closed to the wall, the swing arm is able to rotate in an angle of 180 degrees to maximize working area. The wall mounted jib crane is widely used for short range and intensive transportation in warehouses, workshops, assembly lines, mines, wharf etc.

a. Overload protection in the event of overload, the hoist unit switches off and only the lowering motion is possible

b. All movements can be switched off by actuating the emergency-off switch at the control station via a main contact

c. Safety hook latch used for avoiding the lifted material out off from the hook

d. Protective earth conductor is fitted as standard

e. Voltage lower protection system

f. Current overload protection system

 

a. 36V control voltage safety for human being.

b. Easy to control, no additional driver necessary, operate following the travelling of crane and hoist

c. Double step button with emergency to achieve safety stop

d. Connected with the electric trolley suspended under trolley

e. Protection class IP65

f. Operation life not less than 500,000 times

 

a. Taiwan Yuding or world famous brand,

b. 24V control voltage safety for human being.

c. Remote distance: not less than 100meters,

d. Easy to control, no additional driver necessary, to operate more freely on the ground

e. Tens thousands of connection frequency points, non-interference with each other

f. Two steps push button or joystick station with emergency stop.

g. Protection class IP65

h. Operation life: not less than 500,000 times